Methods For Concrete Foundation Repair In Kansas City (Expert Guide)


The process of repairing a foundation involves resurfacing its elements. A new coat of concrete is applied to the damaged walls to improve the foundation’s structural integrity and the building’s structural soundness. It is the cheapest long-term solution. Click here for more information.

If you suspect an issue with your foundation, get it fixed immediately! For instance, quickly consulting the best foundation repair expert or company in Kansas City to repair a faulty foundation prevents further damage. The second reason links to the first. It is essential to note that the longer you delay correcting a foundation issue, the more harm you will do to your property.

What Is The Best Type Of Foundation Repair Method?

The best foundation repair in Kansas City is the Slabjacking and Piering method. If your concrete slab or foundation is cracked, your contractor will use slabjacking to lift it back up and offer a better sub-surface for it to set on. Piercing may be necessary for more severe issues. Piering is a method of supporting your home by drilling hydraulic jacks into the earth underneath your foundation.

What Are Common Techniques To Fix Foundation Problems?

There are different techniques to remedy foundation crises; the best foundation repair techniques most practiced in Kansas City are listed below.


Excavation, foundation elevation, and hydraulic piers are required. This method is permanent, even if the home settles and the soil moves.


Also called mud jacking or slab jacking. This approach employs a cement mixture injected beneath the concrete foundation to float it back into place. This method is less expensive and requires less excavation and equipment.


A specialist can utilize two materials to support the walls in this restoration method: steel and carbon fiber. If there are significant shifts, steel is employed, while carbon fiber is an ideal choice if there is just slight bending in the walls.

For drainage and moisture issues, sealing is a waterproofing solution. A comprehensive waterproofing solution is not required for every property with a moisture problem.

How Do You Repair A Concrete Foundation?

When repairing a concrete foundation, there are ways to fix concrete foundations without tearing them apart and starting over from the beginning.

If you think there’s trouble, do the following:

  1. Check the foundation for evident faults.
  2. Get a house foundation inspection by a professional.
  3. If required, get advice from a structural engineer.

It would be best to establish what is causing the discomfort before deciding on a repair procedure. Look for indications in moldings and trim boards, mortar cracks in walls, and low-level windows. Take notice of the recent weather; an unusually dry or rainy season might induce movement in the underlying soil.

Slabjacking is the most frequent procedure for restoring sunken concrete in smaller slabs, such as residential slabs, driveways, walkways, swimming pool decks, etc. Pumping a cement putty through small, deliberately placed holes in the concrete slab is the process of slab jacking; once installed, the cement solidifies into a thick concrete mass, providing a reliable bearing for the concrete slab. The cement component of the mixture will transfer the benefits of lime stabilization to the foundation. This treatment returns the slab to its appropriate grade and stabilizes the sub-soil, preventing recurring problems.

 Piering is the process of raising a settled beam to grade using strategically positioned mechanical jacks. However, to minimize further or unneeded damage, the foundation contractor must gently elevate the beam. Once raised, the beam is secured in place by a specifically constructed spread footing and pier. Hydraulic piers are often utilized to elevate and stabilize the foundation in more severe difficulties, such as those encountered in residential and commercial structure foundation displacement. The footing is sufficiently deep to be insensitive to changes in soil moisture. Additionally, it is designed to distribute the weight well without adding bulk or mass. Steel connects the pier to the footing and holds the foundation beam.

How Do You Fix Crumbling Concrete Foundation?

Contrary to popular belief, Experts may manufacture concrete from any substance; Weak particles and deteriorating concrete are symptoms of a damp foundation. In turn, this reduces resistance and stability, causing issues.

It is essential not to disregard the issue. Determining early warning flags requires a foundation inspection.

  1. Foundation cracks
  2. White powder that flakes off
  3. Humidity in the basement
  4. Fragile concrete block foundation joints
  5. Concrete fragments dropping
  6. Foundation bubbles

The foundation is the building’s bedrock. When its integrity is questioned, significant issues develop that influence the remainder of the property. Fortunately, suppose the indicators of a collapsing foundation are detected early enough. In that case, the best foundation repair expert or company in Kansas City can help you halt the damage. This specialist will examine the damage and offer repairs to restore the building’s structural integrity and enlighten you about the issue and how to fix it.

How Do You Fix A Sagging Foundation?

Load-bearing piers can be used to remedy a sagging foundation; depending on the severity of the problem, your home, the soil, and other criteria, your specialist may utilize one of the following pier types:

  • Helical Piers – Massive steel screws that are hydraulically pushed into the earth, then attached to the foundation or slab to secure and elevate it. They are ideal for lightweight constructions or when the ground conditions make conventional piers challenging to install.
  • Steel Push Piers – This pier method is made of solid steel poles pushed into the ground and secured with brackets. These work well in a more solid foundation that is less impacted by water, erosion, and other factors.
  • Hydraulic Lift Piers – If the sagging foundation is severe or more support is required, hydraulic lift piers that support the whole slab may be installed. Residential and commercial usage is possible. The pier supports are hydraulically lifted after installation until the structure is balanced and stable.

The second procedure is high-pressure Mudjacking or Plastering; this method is ideal for sinking caused by damage to the concrete slab that supports the foundation.

Mudjacking is an economical and straightforward method that includes drilling holes in the slab and injecting a concrete cement paste below it; an expert can use it to level sagging slabs, lift damaged slab parts, or stabilize them.

Do Foundation Piers Really Work?

Also, to level the building and avoid additional sinking foundation difficulties, a foundation pier is essentially a pole or support structure placed into the earth underneath the foundation. It works and has been tested.


According to Home Advisor, most foundation repairs cost roughly $4,702. A significant crack repair might cost $10,000 or more, whereas minor crack repairs can be $500. The average homeowner pays $2,144 to $7,466. Solicit advice from the best foundation repair expert in Kansas City. A structural engineer’s assessment might also reveal the extent of required repairs. Homeowners who do not want to compromise the restoration of their foundation are advised never to attempt patching the evident signs themselves but give them to a qualified or the best foundation repair expert company here in Kansas City.